Technological directions of reducing the energy intensity of the primary tillage process

Authors

  • Vasiliy Mihaylovich Boykov Saratov State Agrarian University named after N.I. Vavilov
  • Igor Leonidovich Vorotnikov Saratov State Agrarian University named after N.I. Vavilov
  • Sergey Viktorovich Startsev Saratov State Agrarian University named after N.I. Vavilov
  • Igor Andreevich Bashmakov Saratov State Agrarian University named after N.I. Vavilov

DOI:

https://doi.org/10.28983/asj.y2019i11pp86-88

Keywords:

tillage, depth of tillage, strip tillage, field width

Abstract

On the basis of the rational formula of academician V.P. Goryachkin, the definition of the amount of work or energy spent on processing a certain area of the field at a given depth is given. As a result of theoretical studies of field processing by the traditional method, the graphic dependences of the work spent in continuous processing of one hectare of arable land on the depth of soil cultivation are established. The theoretical results strip tillage installed the graphics according to the work required in bandpass processing of one hectare of arable land, of the bandwidth at the maximum depth. Possible options for reducing the energy intensity of tillage in each of the considered methods of tillage are proposed.

Downloads

Download data is not yet available.

Author Biographies

Vasiliy Mihaylovich Boykov, Saratov State Agrarian University named after N.I. Vavilov

Doctor of Technical Sciences, Professor

Igor Leonidovich Vorotnikov, Saratov State Agrarian University named after N.I. Vavilov

Doctor of Economic Sciences, Professor

Sergey Viktorovich Startsev, Saratov State Agrarian University named after N.I. Vavilov

Doctor of Technical Sciences, Professor

Igor Andreevich Bashmakov, Saratov State Agrarian University named after N.I. Vavilov

Post-graduate Student

References

1. Аристов А.Н., Мулл М.Г. Результаты опытов по определению влияния неравно-мерности глубины вспашки на потери урожая яровой пшеницы // Почвообрабаты-вающие и посевные машины и динамика агрегатов: Труды ЧИМЭСХ. – Челябинск, 1972. – Вып. 57. – С. 5–12.
2. Афонин Е.Д., Береславский С.Л. Метод определения коэффициентов рациональной формулы Горячкина В.П. // Механизация и электрификация сельского хозяйства. – 1982 – №4. – С. 42– 44.3. Вайнруб В.Н. Оптимизация режимов работы пахотного аг-регата //Механизация и
электрификация сельского хозяйства. – 1980. – № 1. – С. 19–21.
4. Горячкин В. П. Собрание сочинений. Т. 2.– М.: Наука, 1970. – 544 с.
5. Князев А.А., Баев Н.К. Исследование влияния неравномерности глубины пахоты на урожайность зерновых культур в условия Среднего Поволжья // Почвообрабатывающие и посевные машины и динамика агрегатов: Труды ЧИМЭСХ, Челябинск, 1972. – Вып. 56. – С. 13–18.
6. Лобачевский Я.П. Современные почвообрабатывающие технологии. – М.: МГАУ им.В.П.Горячкина,1999. – 39 с.
7. Машины, работающие по «полосовому» пути. Технология стрип-тилл. – Режим доступа: https://propozitsiya.com/mashiny–rabotayushchie–po–polosovomu–puti–tehnologiya–strip–till.
8. Несмиян А.Ю. Машинно-технологическое обоснование процессов обработки поч-вы и посева пропашных культур в условиях дефицита влаги: дис. …д-ра техн. наук. – Зерноград, 2017. – 424 с.
9. Орлов В.В., Рухлевич Н.В. Strip-till: опыт Самарской области // Ресурсосберегаю-щее земледелие. – 2011. – № 3. – С. 18–19.
10. Охинько И.П., Татошин И.Ф. Влияние обработки почвы на дифференциацию об-рабатываемого слоя и урожайность зерновых культур // Земледелие. – 1984. – № 5. – С. 22– 24.
11. Сафиулин М. Опыт США: Технология полосовой обработки // Ресурсосберегаю-щее земледелие. – 2011. – №2. – С. 17–19.

Published

2019-11-14

Issue

Section

Agroengineering

Most read articles by the same author(s)

1 2 > >>