Axial fan selection for pneumatic fruit shaker

Authors

  • Mikhail Semenovih Eliseev Saratov State Agrarian University named after N.I. Vavilov
  • Valentin Vladimirovich Vasylchikov Saratov State Agrarian University named after N.I. Vavilov
  • Aleksey Alekseevich Leontyev Saratov State Agrarian University named after N.I. Vavilov
  • Aleksey Maksimovich Maradudin Saratov State Agrarian University named after N.I. Vavilov
  • Andrey Vladimorovich Peretyatko Saratov State Agrarian University named after N.I. Vavilov

DOI:

https://doi.org/10.28983/asj.y2019i11pp89-92

Keywords:

fan, pneumatic shaker, pressure, air flow, hydraulic resistance

Abstract

The article describes a method for an axial fan selection for a pneumatic fruit shaker. Based on the design of the pneumatic shaker and the input parameters of its operation (air flow rate at the nozzle exit and the crown size of the treated trees), the fan characteristics (capacity, generated pressure, and power consumption) are determined. The brand of suitable commercially available fan is recommended.

Downloads

Download data is not yet available.

Author Biographies

Mikhail Semenovih Eliseev, Saratov State Agrarian University named after N.I. Vavilov

Doctor of Technical Sciences, Professor

Valentin Vladimirovich Vasylchikov, Saratov State Agrarian University named after N.I. Vavilov

Candidate of Technical Sciences, Associate Professor

Aleksey Alekseevich Leontyev, Saratov State Agrarian University named after N.I. Vavilov

Candidate of Technical Sciences, Associate Professor

Aleksey Maksimovich Maradudin, Saratov State Agrarian University named after N.I. Vavilov

Candidate of Technical Sciences, Associate Professor

Andrey Vladimorovich Peretyatko, Saratov State Agrarian University named after N.I. Vavilov

Candidate of Technical Sciences, Associate Professor

References

1. Марадудин А.М., Загоруйко М.Г., Леонтьев А.А. Теоретический расчет устрой-ства для сбора соломы с поверхности поля при вертикальном мульчировании // Международный научно-исследовательский журнал. – 2015. – № 11(42). – Ч. 6. – С. 73–76.
2. Обоснование конструктивно-кинематических параметров питающего устрой-ства / М.С. Елисеев [и др.] // Аграрный научный журнал. – 2017. – № 9. – С. 50–56.
3. Сипайлов Г.А., Санников Д.И., Жадан В.А. Тепловые, гидравлические и аэроди-намические расчеты в электрических машинах: учебник для вузов по специально-сти «Электромеханика». – М.: Высш. шк., 1989. – 239 с.
4. Черкасский, В.М. Насосы, вентиляторы, компрессоры: учебник для теплоэнер-гетических специальностей вузов. – М.: Энергия, 1977. – 424 с.

Published

2019-11-14

Issue

Section

Agroengineering

Most read articles by the same author(s)